PerkinElmer

检测器

OF

From ICP-MS dual-stage detectors to gas chromatography Flame Photometric and Photoionization Detectors, we have high-quality dual-stage laboratory detectors for any application. Comes in three different models.

  • 产品与服务

  • 资源,活动及更多信息

缩小结果
产品类型
  • Accessories (92)
  • Consumables (9)
  • Service Parts (7)
型号兼容
  • ELAN DRCs (9)
  • ELAN 9000 (9)
  • ELAN 6x00 (9)
  • NexION (2)
产品品牌名称
  • PerkinElmer (7)
产品组
  • Replacement Part (42)
  • Add-on Kit (31)
  • Accessory (14)
  • Detector Kit (5)
  • Ion Lenses (3)
  • ShadowStops (2)
  • Ion Lens Tools (2)
  • Upgrade Kit (1)
  • Bakeout Disk (1)
放射性同位素
  • Ni-63 (4)
技术类型
  • ICP-MS (8)
类型
  • ICP-MS (1)

"检测器" 1-50108 产品与服务

每页
PerkinElmer

Cassette Lens ShadowStop for ELAN 9000/DRCs (Post-2005)

Replacement Cassette Lens ShadowStop for ELAN® 9000, DRC-e, and DRC II ICP-MS series instruments manufactured after April 2005.
ICP-MS_Detector

SimulScan Dual-Stage Detector for NexION 350/1000/2000

The dual -stage detector is an integral part of the NexION ICP-MS SimulScan system. This discrete dynode electron multiplier measures both high- and low-level analytes simultaneously.
Series II Ion Lens for ELAN

Series II Ion Lens for ELAN 6x00/9000/DRCs (Post-1998)

Series II Ion Lens for ELAN® 6x00, 9000, DCR-e, and DRC II ICP-MS series instruments manufactured between January 1998 and April 2005.
PerkinElmer

Replacement Glow Plug

Replacement glow plug for Gas Chromatorgaphy with Flame Ionization Detector (FID).
PerkinElmer

9.5 eV, PID Lamp, PID Replacement Parts

The PID utilizes a high-intensity ultraviolet light source to ionize the sample components eluting from the column in order to generate the chromatographic signal.

The PID has a maximum recommended operating temperature of 250 °C. The lamp can be replaced with a blanking disk to allow bake-out operation (up to 350 °C). Kit includes: detector, heater, sensor, makeup gas needle valve, and all necessary mounting hardware for installation on a GC. Requires, but does not include, amplifier (N6120061) and lamp power supply (N6120062). Firmware revision 1.2 or greater is required. Firmware must be PerkinElmer Service installed. Improved selectivity for multiple ring aromatic, sulfur compounds.

PerkinElmer

10.2eV PID Lamp

For most applications including aromatics, alkenes,and aliphatics higher than C4. Shipped standard with PID.
PerkinElmer

Thermal Conductivity Detector (TCD) 1/8in. PPC Makeup Kit for PerkinElmer AutoSystem Series GCs

Includes parts required to add PPC controlled make-up gas to an existing Thermal Conductivity Detector (TCD). Includes tubing, tee-piece, PPC pneumatics module and PPC fri t#4 (P/N N6120155). Requires PPC capability in PerkinElmer AutoSystem XL GC.
PerkinElmer

Detector Electronics Upgrade Kit

Boosts detector life at least 20%. For ELAN 9000/6X00/DRC smanufactured prior to April, 2005. Service installation is required, but not included.

Series II Ion Lens Removal Tool for ELAN 6x00/9000/DRCs (Post-1998/Pre-2005)

Flexible shaft driver with removable 2 mm Hex Ball Bit for use with ELAN® 6x00, 9000, DRC-e and DRC II ICP-MS series instruments manufactured between 1998 and 2005.
PerkinElmer

Auto-Ignite Flame Ionization Detector (FID) without PPC Add-On Kit for the PerkinElmer AutoSystem XL, 240V

Kit includes detector assembly with heater and sensor, heater block, igniter, hydrogen pressure regulator and needle valve. Requires but does not include amplifier (P/N N6120162). Requires PerkinElmer AutoSystem XL to have firmware revision 3.3 or higher. Note: PerkinElmer AutoSystem XL GO'S shipped prior to January 1997 require a new detector cover.

Nitrogen Phosphorus Detector (NPD) Add-On Kit for PerkinElmer AutoSystem Series GCs, 120V

The AutoSystem NPD design offers quick and easy bead installation.
PerkinElmer

Cassette Ion Lens Upgrade Kit for ELAN 6x00/9000/DRCs (Pre-2005)

Cassette ion lens upgrade kit for ELAN® 6x00, 9000, DRC-e, and DRC II ICP-MS series instruments manufactured before April 2005.

"检测器" 1-50108 产品与服务

每页