PerkinElmer

动态热机械分析(DMA)

OF

Accurately characterize the modulus, compliance, damping and other bulk properties of materials using our Dynamic Mechanical Analysis (DMA) solutions. Our state-of-the art instrumentation measures changes in rheological behavior under dynamic conditions as a function of temperature, time, frequency, stress, atmosphere, or a combination of these parameters. Applications and measurements include:

  • Stress-strain
  • Creep recovery
  • Thermomechanical
  • Moisture induced phase transitions
  • Moisture sensitive materials like paper, natural fibers, and food products
  • Swelling, shrinking and stiffness changes as humidity changes
  • Plasticizing and Tg effects as seen in nylon and polyurethanes

  • 产品与服务

  • 资源,活动及更多信息

缩小结果
产品类型
  • Accessories (46)
  • Consumables (18)
  • Software and Informatics (1)
  • Instruments (1)
材料
  • Aluminum (1)
  • Stainless Steel (1)
温度-最高
  • Over 100 (1)
型号兼容
  • DMA 8000 (11)
  • Diamond DMA (2)
  • Diamond TMA (1)
产品组
  • Pan Crimper (14)
  • Probes and Sample Tools (8)
  • Starter Kit (5)
  • Humidity Sensor (3)
  • Material Pockets (3)
  • Plates and Replacement Parts (3)
  • Forceps (2)
  • PMMA (2)
  • Mesh Pockets (2)
  • Clamp Assemblies and Replacement Parts (2)
  • Book (1)
  • Gas Purge (1)
  • Probe Assembly (1)
  • Spares Kits (1)
  • Microswitch Extension (1)
  • Air Dryer (1)
  • Cups (1)
  • Regulator (1)
  • Sample Pans (1)
  • Adapter Kits (1)
  • Sample Load Fixture (1)
  • Capsule Kit (1)
  • DMA Assembly (1)
  • Measuring Systems (1)
  • Bending Replacement Parts (1)
  • Flow Meter (1)
  • Gas Station (1)
  • Sample Tubes (1)
  • Replacement Parts (1)
  • UV Lamps (1)
技术
  • Thermal Analysis (1)
技术类型
  • EA (19)
  • DSC (12)
  • CHNO (2)
  • Thermal Analysis (1)

"动态热机械分析(DMA)" 1-5066 产品与服务

DMA 8000 N5330101

DMA 8000 SYS QUARTZ WINDOW SS/Ti CLAMPS

DMA 8000的创新型设计、高效灵活的操作使之成为材料研究开发和生产线质量控制的理想仪器。可广泛应用于聚合物、复合材料、制药以及食品行业。
PerkinElmer

Volatile Sealer Assembly

For use with volatile, viscous,noncorrosive samples.

Standard Sample Pan Crimper Press

Used to crimp covers on standard DSC pans of aluminum, gold and copper. Design incorporates a replaceable crimper head.
PerkinElmer

PMMA for Diamond DMA, 0.2mm x 8mm x 40mm

Set of 10 for Tension Measuring System, Dimensions: 0. 2mm x 8mm x40mm,

High Pressure Capsule Sealing Tool

This reliable sealing tool is fast and precise. It employs a built-in torque clutch which guarantees that all capsules are closed with the same torque.
PerkinElmer

PMMA for Diamond DMA, 1.5mm x 10mm x 50mm

Set of 10 for bending Measuring System, Dimensions: 1.5mm x 10mm x50mm
PerkinElmer

DMA 8000 Mesh Pockets (Set of 25)

For running pharmaceuticals, paints and other non supporting samples where letting moisture and solvent in and out is desirable.
PerkinElmer

MATERIALS POCKET (SET OF 10)

Special problems often require special tools and a wide range of options exist for the DMA 8000.
PerkinElmer

Manual Crimper

This sealer is capable of sealing both crimped pans and hermetic sealed pans . The die that is supplied can seal both of these, one side for crimped, the other for hermetic. Includes Hermetic Die N5356032 Stage N5356035 and Extruding Rod N5356033
PerkinElmer

Quartz Parallel Plate Probes for DMA 7/DMA 7e, 6 mm diameter flat tip

The following Quartz Probes are used on the Large and Small Quartz Parallel Plate Measuring Systems.

Large Volume Stainless Steel Capsule Kit

This kit includes Quick Press (P/N 09908467), Quick Press Spacer Die (P/N 03191047), 1 Pair Guard Ring Inserts (P/N 03190236), and 20 Pans, Covers and O-Rings (P/N 03190218).

Quartz Parallel Plate Probes for DMA 7/DMA 7e and TMA 7, 3 mm diameter flat tip

PerkinElmer's quartz probes are manufactured to extremely high tolerances to ensure you obtain the most accurate data from your instrument.

Sample Load Fixture for DMA 7/DMA 7e and TMA 7

Used to align and install sample into film sample clamps.

Non-Magnetic, Nonserrated Stainless Steel Straight Forceps

Non-Magnetic, Nonserrated Stainless Steel Straight Non-Magnetic, Hooked

Class 1.1 Calibrating Weight, 100 mg.

Class 1.1 Calibrating Weight (per ASTM E617,100 mg)

Non-Magnetic, Hooked Forceps

Non-Magnetic, Nonserrated Stainless Steel Straight Non-Magnetic, Hooked

Quick Press Spacer Die

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).

Quartz 3-Point Bending System Probes for DMA 7/DMA 7e and TMA 7, 0.5mm radius spherical tip

PerkinElmer's quartz probes are manufactured to extremely high tolerances to ensure the most accurate analysis data from your instrument.

Filter Dryer Kit

Filter Dryer Kit removes moisture and particulates from your purge gas. Includes all the necessary fittings needed to make pneumatic connections easy

Thermal Analysis Gas Station for all Thermal Analyzers (controls up to four purge gases). For use with Pyris Series or 7 Series/UNIX software.

Thermal Analysis Gas StationUse the Thermal Analysis Gas Station (TAGS), a gas selector accessory with all thermal analyzers. The TAGS is a very flexible accessory featuring full control of all gases used in thermal analysis. In addition to performing gas switching, the TAGS also fully controls the gas flow rate, independent of the type of gas, and detects rapid changes in pressure and empty cylinders.

Quick Press

Included in the Large Volume Stainless Steel Capsule Kit (P/N 03190021).
PerkinElmer

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Single and Dual Cantilever

Universal DMA7/DMA 7e Probe Tip Holder for use with Stainless Steel Parallel Plate, 2-, 3-, and 4-Point Bending. Single and Dual Cantilever Measuring systems. Includes probe tip holder (P/N N5390104), collet (P/N N5391004), and lock nut (P/N N5391005).

"动态热机械分析(DMA)" 1-5066 产品与服务