PerkinElmer

Reference Standards

Whether you're performing analytical or biological analyses, we provide the highest quality standards to help with your testing needs.

Radioisotopic Standards

We provide 3H and 14C standard sets for testing scintillation counter performance, as well as internal standard capsules for your own standard preparation. Each standard is prepared gravimetrically from NIS traceable solutions and QC-tested using our calibrated counting systems.

Analytical Standards

We offer a portfolio of the highest quality inorganic standards and organic standards to enhance your instruments' analytical performance, all certified and tested to provide you the quality and reliability you expect for all your application needs. We also offer a wide selection of GC and GC/MS organic standards, each supplied with a comprehensive Certificate of Analysis that documenting quality and assurance to the highest level obtainable by a calibration standard.

产品与服务 (474)
Filters:

筛选条件

全部展开 全部折叠
浓度
  • 1000.0 µg/mL (93)
  • 1.0 µg/mL (59)
  • 10000.0 µg/mL (44)
  • 1000 µg/g (37)
  • 2000 µg/mL (16)
  • 10.0 µg/mL (9)
  • 100 µg/g (5)
  • 10 µg/g (5)
  • 900 µg/g (4)
  • 500 µg/g (4)
  • 300 µg/g (4)
  • 50 µg/g (4)
  • 30 µg/g (4)
  • 1000 µg/mL (2)
  • 5000 µg/g (2)
  • 6 mg/g (1)
  • 1.5 mg/g (1)
  • 30 mg/g (1)
  • 40 mg/g (1)
  • 15 mg/L (1)
  • 0.5 mg/g (1)
  • 9 mg/L (1)
  • 12 mg/L (1)
  • 3 mg/L (1)
  • 15 mg/g (1)
  • 3 mg/g (1)
  • 6 mg/L (1)
  • 0.1 mg/L (1)
  • 100.0 µg/mL (1)
  • 100 µg/mL (1)
  • 70 mg/g (1)
  • 1 mg/g (1)
  • 10 mg/g (1)
  • 5.0 µg/mL (1)
  • 2 mg/g (1)
  • 10 mg/L (1)
  • 10 µg/mL (1)
  • 0.1 mg/g (1)
级别
  • TruQ (130)
  • TruQms (152)
长度
温度-最高
温度-最低
Number of Elements
  • Multiple (164)
  • Single (187)
产品组
  • Inorganic (25)
  • Metallo-Organic (117)
  • Organic (34)
标准型
  • AA Standards (4)
  • Acid Number (1)
  • Alternate Metal Standards (1)
  • ASTM D-6584 (1)
  • Base Number (1)
  • Biodiesel (6)
  • Blank Standards (6)
  • Calibration Standards (10)
  • Contract Required Standards (1)
  • Coolant Standards (6)
  • Crackle Test (1)
  • Devolatilized Diesel Fuel (3)
  • Drinking Water Standards (2)
  • Environmental Standards (10)
  • Fuel Dilution (4)
  • Initial Calibration Verification Standards (1)
  • Initial Calibration Veri�tion (1)
  • Installation (1)
  • Instrument Calibration (4)
  • Instrument Check Standards (1)
  • Instrument Set-Up and Calibration (5)
  • Instrument Setup Solutions (3)
  • Interference Standards (8)
  • Internal (2)
  • Internal Standard Mixes (7)
  • Isotope Standard (1)
  • Karl Fischer (1)
  • Ketones for Method 8260B (1)
  • Low UV Standard (1)
  • Matrix Oils and Solvents (7)
  • Metal Additive (3)
  • Method 524.2 (2)
  • Method 525.2 (1)
  • Method 624 Standards (4)
  • Method 625 (3)
  • Method 8082 PCB's Standards Kit (1)
  • Method 8260B Standards (2)
  • Method 8270C Mixes (3)
  • Method 8270C Standards (2)
  • Method 8270C Surrogates (2)
  • Mix B Purgeable Gases for Methods 8260B/524.2 (1)
  • Multi-Element Standards (32)
  • Multi-Element, Environmental Analysis (1)
  • Multi-Element, Environmental Analysis (1)
  • Multi-Element, Environmental Analysis, Instrument Set-Up and Calibration (12)
  • Nanoparticle (3)
  • OilExpress (6)
  • Particle Analysis (3)
  • Performance Verification Standards (21)
  • Pesticides (2)
  • Pharmaceutical Analysis Standards (13)
  • Proficiency Testing (3)
  • Quality Control Standards (5)
  • Red Dye in Diesel (8)
  • Setup Solutions (2)
  • Single-Element (40)
  • SmartTune Standards (2)
  • Soot Content (2)
  • Spike Sample Standards (3)
  • Sulfur (6)
  • TCLP Standards (1)
  • Test Mix (3)
  • Trace Metal Standards (2)
  • Tuning Solution (1)
  • Universal Data Acquisition (1)
  • USP/ICH (1)
  • Viscosity Reference (8)
  • Volatile Organics Combination Blend (1)
  • Wash Standards (2)
  • Wear Metal (4)
技术类型
  • AA/ICP-OES (134)
  • ICP-MS (166)
体积

排序方式

1-25 的 474 产品与服务

  • TruQ MS Caibration Std Kit

    TruQ MS Calibration Std Kit EPA 200.8

    Complete Reference Standards calibration kit for water quality analysis according to EPA 200.8 for ICP-MS.

  • TruQ Caibration Std Kit

    TruQ Calibration Std Kit EPA 200.7

    Complete Reference Standards calibration kit for water quality analysis according to EPA 200.7 for AA and ICP-OES.

  • TruQ MS Calibration Std Kit ISO 17294

    TruQ MS Calibration Std Kit ISO 17294

    Complete Reference Standards calibration kit for water quality analysis according to ISO 17294-2 for ICP-MS.
  • PerkinElmer

    NexION 5000 ICP-MS Solution Kit

    Multi-Element Calibration Standard Solution for NexION 350 X/D/S 1000/2000/5000 . Every PerkinElmer standard is supplied with a comprehensive Certificate of Analysis.

  • Red Dye #26 Calibration, 10.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 10.0 mg/L with an uncertainty of +/- 2.5 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 15.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 15.0 mg/L with an uncertainty of +/- 3.0 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 12.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 12.0 mg/L with an uncertainty of +/- 2.7 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 9.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 9.0 mg/L with an uncertainty of +/- 2.3 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 6.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 6.0 mg/L with an uncertainty of +/- 1.9 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 3.0 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of 3.0 mg/L with an uncertainty of +/- 1.3 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration, 0.1 mg/L

    This Red Dye #26 Diesel Calibration Standard has a certified concentration of < 0.1 mg/L with an uncertainty of +/- 0.3 mg/L. This control standard is produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics. Each lot of the product passes rigorous Quality Control by UV-VIS and each product ships with a comprehensive Certificate of Analysis (CoA).

  • Red Dye #26 Calibration Kit, 6 x 100 mL

    This Red Dye #26 Diesel Standard Calibration Kit contains the <0.1, 3, 6, 9, 12, and 15 mg/L concentration 100 mL bottles. These control standards are produced by VHG from a highly characterized, certified dye, delivering consistent from lot to lot performance for each calibration standard with excellent correlation statistics.

  • PerkinElmer

    NexION DRC O2 Detection Limit Solution

    Multi-Element Standard for ICP-MS Instrument Calibration. Every PerkinElmer standard is supplied with a comprehensive Certificate of Analysis.

  • PerkinElmer

    NexION DRC and Detection Limit Solution, 125 mL

    Multi-Element Standard for ICP-MS Instrument Calibration. Every PerkinElmer standard is supplied with a comprehensive Certificate of Analysis.

  • PerkinElmer

    NexION 5000 Stability Solution 1% HNO3, 500 mL

    Multi-Element Standard for ICP-MS Instrument Calibration. Every PerkinElmer standard is supplied with a comprehensive Certificate of Analysis.

  • PerkinElmer

    NexION 5000 Setup Solution 1% HNO3, 500 mL

    Multi-Element Standard for ICP-MS Instrument Calibration. Every PerkinElmer standard is supplied with a comprehensive Certificate of Analysis.

  • Mercury (Hg) Standard

    Mercury (Hg) Pure Plus Standard

    Each Single Element Calibration Standard for ICP-MS is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.

  • Parti-Count Particle Count Calibration Fluid, 100 mL

    Each Particle Analysis standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.
  • USP/ICH Class 3 Mo, Sb and Sn - Oral PDE

    The Analytical Standards for ICH/ Global Compliance are made for the analysis of trace metals in pharmaceutical analysis. Couple our accurate and reliable ICH standards with your ICP-MS and you will remain compliant with the new and changing regulations.

  • USP/ICH Class 3 Ba, Cr, Cu and Li - Oral PDE

    The Analytical Standards for ICH/ Global Compliance are made for the analysis of trace metals in pharmaceutical analysis. Couple our accurate and reliable ICH standards with your ICP-MS and you will remain compliant with the new and changing regulations.

  • Particle Count Verification Fluid

    Each Particle Analysis standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.
  • USP/ICH Class 2B, Se and Ag - Oral PDE

    The Analytical Standards for ICH/ Global Compliance are made for the analysis of trace metals in pharmaceutical analysis. Couple our accurate and reliable ICH standards with your ICP-MS and you will remain compliant with the new and changing regulations.

  • USP/ICH Class 2A Elements - Oral and Parent PDEs

    The Analytical Standards for ICH/ Global Compliance are made for the analysis of trace metals in pharmaceutical analysis. Couple our accurate and reliable ICH standards with your ICP-MS and you will remain compliant with the new and changing regulations.

  • USP/ ICH CLASS 1 Elements + TI - Oral PDE

    The Analytical Standards for ICH/ Global Compliance are made for the analysis of trace metals in pharmaceutical analysis. Couple our accurate and reliable ICH standards with your ICP-MS and you will remain compliant with the new and changing regulations.

  • Ultra Low Particulate V-Solv - Colbalt, 5 Gal

    Each V-Solv standard is supplied with a comprehensive Certificate of Analysis that documents the quality and reliability.
  • Jump to: