PerkinElmer

加热和冷却系统

OF

使用目前最可靠的冷却器、制冷机和热交换系统精确控制仪器的温度。
经过数十年的验证及数千次从激光器到分析设备安装的经验,我们的冷却器、制冷机经过彻底的测试,可日复一日、年复一年地保持高性能运转。

产品与服务 (20)
Filters:

筛选条件

全部展开 全部折叠
产品类型
  • Accessories (15)
  • Consumables (5)
长度
温度-最高
温度-最低
产品品牌名称
  • DuraChill (1)
产品组
  • Cooling Systems (16)
  • Heating Systems (1)
  • Humidity Sensors (1)
  • Minor Accessories (1)
技术类型
  • ICP (1)
  • IR (1)
  • TEA (8)
体积

排序方式

1-20 的 20 产品与服务

  • DuraChill Dynamic Filter and UV Light Biological Inhibitor

    The DuraChill® recirculating chiller provides cooling power for demanding applications and serves as an economical alternative to tap water cooling systems. Easy to use and maintain, it combines technological innovation with precise temperature control to deliver reliable heat removal for a wide variety of applications.
  • ICP-OES Chiller Coolant Mix, 1/2 Gallon Bottle - Qty. 5

    This Chiller Coolant Mix is designed for use with the PolyScience® WhisperCool Refrigerated Chiller in Avio and Optima ICP-OES instruments. This coolant mix ships as 5 half-gallon bottles.
  • PerkinElmer

    Air Filter for PolyScience Chiller, Optima and Elan

    Replacement Air Filter for PolyScience Chillers used with Optima ICP-OES and Elan ICP-MS instruments.
  • WE016558

    ICP-MS Chiller Coolant Mix, 1 L Bottle - Qty. 1

    This Chiller Coolant Mix is designed for use with the PolyScience® WhisperCool Refrigerated Chiller in NexION and ELAN ICP-MS instruments. This coolant mix ships as a 1 Liter bottle.
  • PolyScience Replacement Air Filter

    This Replacement Air Filter is designed for use with the PolyScience® WhisperCool Refrigerated Chiller in ICP-MS and ICP-OES instruments. This 13 inch x 14 inch Air Filter with Frame is fully washable and removes quickly for easy cleaning.
  • Noise Enclosure for Polyscience 6000 Chiller

    Chiller noise in the lab can be distracting, tiring, irritating and stressful. But many people are unaware of the presence of environmental sound at damaging levels, or at the level on which sound becomes harmful.
  • PerkinElmer

    Hot Stage Accessory - 120 V

    This Hot Stage Accessory runs on 100-120 V, 60 Hz. The accessory consists of a heating block and a temperature controller that can heat samples up to 230°C in 1°C increments. The hot stage accepts FT-IR cell windows. It attaches to PerkinElmer Spotlight systems via the slide clip on the instrument's sample stage.

  • PerkinElmer

    LN2 Cold Finger Cylinder - Aluminum

    The LN2 Cold Finger Accessory is a solid aluminum cylinder, 2.94 inches in diameter with 16 insulated ribs, that is used to maintain sub ambient conditions for coolants from liquid nitrogen to ice water.

  • PerkinElmer
  • PerkinElmer

    Intracooler Insulated Bolt Kit

    The Intracooler Insulated Bolt Kit is a spares kit of intracooler connection parts that link PerkinElmer intracoolers to DSC analyzers. This kit includes an insulating disk, split bushing, and a bolt. This kit ships standard with the PYRIS Cooling Accessory Kit.

  • PerkinElmer

    Humidity Generator Sensor Assembly - Calibrated

    The Humidity Generator Calibrated Sensor Assembly is an accessory to the Humidity Generator (N5330400/N5330411). With this part number, you can order a sensor as a replacement or spare.

  • PerkinElmer

    PYRIS LN2 Dewar - 50 L

    The PYRIS LN2 Dewar is a stainless steel vessel, 18 inches in diameter, 38 inches high, and about 95 lbs. This dewar has a operating range (under He purge) of -170° to 300°C. This dewar is compatible with the DSC 6000 with Autosampler, DSC 8000, and the Diamond/Jade DSC with Autosampler.

  • PerkinElmer

    Liquid Nitrogen Cryo Dewar - 50 L

    The Liquid Nitrogen Cryo Dewar is a double-walled container through which a coolant, e.g. liquid nitrogen, flows to expand the subambient operating range for the DMA 8000 to temperatures as low as -196°C. This dewar has a 50 L capacity and is optimal for more demanding cryogenic applications. It ships with an Automatic Cryo Kit (N5330259), and installation instructions.

  • PerkinElmer
  • PerkinElmer

    Automatic Cryo Kit - Type B

    The Automatic Cryo Kit supplies a cryogenic valve that attaches to the AutoCryogenic port on the DMA 8000 analyzer and controls the flow of coolant through a coolant line.

  • PerkinElmer

    PYRIS LN2 Feed Tube - 6 ft

    The PYRIS LN2 Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 6 ft long.

  • PerkinElmer

    PYRIS LN2 Feed Tube - 3 ft

    The PYRIS LN2 Feed Tube is a vacuum-jacketed and super-insulated flexible transfer line with a stainless steel braided and welded exterior. It has an outer diameter of 0.125 in, an inner diameter of 0.101 in, and is 3 ft long. This line ships with the PYRIS LN2 Accessory (N5370259).

  • PerkinElmer
  • 110-325

    Intracooler II

    Intracooler designed for use with PerkinElmer Differential Scanning Calorimeters.